Beijer-electronics CAN J1939 EN Manuel d'utilisateur télécharger pdf

Cable Connection

The pins for the CAN connection are used according to the description below.

Settings in the Configuration Tool

Double-click on the Peripherals folder in the Project Manager in the configuration

tool for the operator panel.

Right-click on Expansion Port and select Fieldbus. Then drag Controller 1 or

Controller 2 with the corresponding driver to the Fieldbus icon. To change the se-

lected driver, select Properties from the Project menu.

For further information, please see the information for the driver.

Pin Description

1Not used

2 Connection to CAN High

3 Connection to CAN Low

4Not used

5 Connection to CAN Shield

Note:

The last user on the CAN bus must be terminated with R120

Ω.

12345

Expansion Module for CAN J1939

Installation

MAEN962 2009-02

English

1 2 3 4

Résumé du contenu

Page 1 - Installation

Cable ConnectionThe pins for the CAN connection are used according to the description below. Settings in the Configuration ToolDouble-click on the Per

Page 2 - Space Requirements

Installation of Expansion Module for CAN J1939 The expansion module is used for the operator panel to communicate via CAN J1939. The correct driver mu

Page 3

Installation of Expansion Module for CAN J1939 The expansion module is used for the operator panel to communicate via CAN J1939. The correct driver mu

Page 4

Cable ConnectionThe pins for the CAN connection are used according to the description below. Settings in the Configuration ToolDouble-click on the Per

Commentaires sur ces manuels

Pas de commentaire

Beijer-electronics CAN J1939 EN Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Beijer-electronics CAN J1939 EN. Beijer Electronics CAN J1939 EN User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels