Beijer-electronics SCOM RBC EN Manuel d'utilisateur télécharger pdf (Page 32)

Command Reference

32 Beijer Electronics, MAEN993

Example

Check which mode the backlight of the device at address 0.7 (group 0, address 7) has

at startup:

According to the data returned by the device at address 0.7 (group 0, address 7), it

does not use the broadcast address 0xFF, if remote controlling is enabled. Instead, it

uses configured device addresses:

0 1 2 3 4 5 6 7...8 9

0x07 0x07

0x4C 0x41 0x55 0x02 0x0D 0x01 0x24 0xDA

0 1 2 3 4 5 6 7 8

0x06 0x07

0x4C 0x41 0x55 0x01 0x0F 0x02 0xFD

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Pas de commentaire

Beijer-electronics SCOM RBC EN Manuel d'utilisateur Page 32