Beijer-electronics SCOM RBC EN Manuel d'utilisateur télécharger pdf (Page 62)

Command Reference

62 Beijer Electronics, MAEN993

5.6.28LAU_STATUS_BUZZER (0x0306)

Current Buzzer State

Returns the current buzzer state. The buzzer state can be changed using the SCOM

command “LAU_CONTROL_BUZZER”.

Supported since Firmware Version

LAUER RBC: 0.0.0.1

Command Stream

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a device never sends a negative acknowledge in

response to this command.

Maximum Lr for this Command

Example

Check whether the buzzer of the device at address 0.7 (group 0, address 7) is activat-

ed:

According to the data returned by the device at address 0.7 (group 0, address 7), the

buzzer is currently deactivated:

0 1 2 3 4 5 6 7...8 9

0x07 ADR

0x4C 0x41 0x55 0x02 ICHKH 0x03 0x06 ICHKD

0 1 2 3 4 5 6 7 8

0x06 ADR

0x4C 0x41 0x55 0x01 ICHKH Ret ICHKD

Ret

Value: 0x00: Buzzer enabled

0x01: Buzzer disabled

Type: Byte

Length: 1

Description: Current buzzer state

0 1 2 3 4 5 6 7...8 9

0x07 0x07 0x4C 0x41 0x55 0x02 0x0D 0x03 0x06 0xF6

0 1 2 3 4 5 6 7 8

0x06 0x07 0x4C 0x41 0x55 0x01 0x0F 0x00 0xFF

1 2 ... 57 58 59 60 61 62 63 64

Pas de commentaire

Beijer-electronics SCOM RBC EN Manuel d'utilisateur Page 62