Beijer-electronics iX T12C EN Manuel d'utilisateur télécharger pdf (Page 4)

Safety Precautions

1SafetyPrecautions

Both the in staller and the owner and/or operator of the operator panel must read

and understand this installation manual.

1.1 General

• Read the safety precautions carefully.

• Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

• Do not use the operator panel in an environment with high explosive hazards.

• The supplier is not responsible for modiﬁed, altered or reconstructed

equipment.

• Use only parts and accessories manufactured according to speciﬁcations of

the supplier.

• Read the installation and operating instructions carefully before installing,

using or repairing the operator panel.

• Neverallowﬂuids,metalﬁlingsorwiringdebristoenteranyopeningsinthe

operator panel. This may cause ﬁre or electrical shock.

• Only qualiﬁed personnel may operate the operator panel.

• Storing the operator panel where the temperature is lower/higher th an

recommended in this manual can cause the LCD display liquid to

congeal/become isotopic.

• The LCD display liquid c ontains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open,ﬂushwithplentyofwaterandgetmedicalattention.

• Theﬁguresinthismanualservesanillustrativepurpose. Becauseofthemany

variables associated with any particular installation, the supplier cannot

assume responsibility for actual use based on the ﬁgures.

• The supplier neither guarantees that the operator panel is suitable for your

particular application, nor assumes responsibility for your product design,

installation or operation.

• It is recommended to turn on and shut down the operator panel at least once

before installing any components/cards or bef ore connecting the operator

panel to external devices, like for example serial devices.

1.2 DuringInstallation

• The operator panel is designed for stationary installation on a plane surface,

where the following conditions are fulﬁlled:

– no high explosive risks

– no strong magnetic ﬁelds

– no direct sunlight

– no large, sudden temperature changes

• Install the product according to the accompanying instal lation instructions.

• Ground the product according to the accompanying installation instru ctions.

• Only qualiﬁed personnel may install the operator panel.

• Separate the high voltage, signal and supply cables.

• Make sure that the voltage and polarity of the power source i s correct before

connecting the product to the power outlet.

BeijerElectronics, MAEN082D

1 2 3 4 5 6 7 8 9 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Beijer-electronics iX T12C EN Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Panneau de contrôle Beijer-electronics iX T12C EN